Can hackers or clone ' security solution of glucose meter

Most of the glucose meter implementation plan includes a number of test pieces or chemical reagents and other supplies, and the operation of such equipment is critical to ensure that these tests are reliable from OEM manufacturers and products correctly read and specific test groups relevant calibration information.

Aitemeier of CryptoMemory, CryptoRF and CryptoAuthentication devices, uses the high security design technology, combines the key used to store non-volatile memory and hardware encryption engine, in order to address these challenges by providing a robust turnkey solutions.

Many medical conditions may encounter various pollutants to water, as well as disinfection chemicals of environmental challenges, in these cases, the user can use contactless RFID label solutions to achieve stable operation.

Aitemeier provides complete RFID solutions, including the smallest of the reader, and a range of different dimensions of the label.

These chips through specially designed to integrate into the device, to prevent computer hackers or clone, copy, or provide poor quality consumables.

Counterfeit products are not only stealing the OEM manufacturers of receipts, and if the blood glucose meter reading errors, will give users pose a security threat.

When an error because the instrument readings for any unfortunate event, supply chain risk more must bear the responsibility. In short, these are proof than barcode or hologram more robust authentication method.

To increase market share, OEMs must be a tester user for low-cost supplies, while adding authentication chip required additional costs must be reduced to a minimum.

Aitemeier provides authentication solutions from the design of the early days of the demand for this, for example, you can use the optimized specifically for the cost of a single encryption engine, because of the frequency of operation of the certification is very low, there is no need to adopt high-performance devices.

Now there is no other supplier as aitemeier, to provide extensive security chip EEPROM storage density.

If you design just need to store small amounts of secret key or certification, you can use the 512-byte type; if the product model information, calibration measurement parameters or test results of storage need more space, equipped with density as high as $ aitemeier diary-and all products have the same level of high hardware security.

Aitemeier provides complete software library to implement a host-side authentication and encryption protocol, and only provides a full range of compatible turnkey host chip manufacturers to improve the security of the entire system while simplifying design.

All cryptographic devices are aitemeier available by either personalize: 1) to each customer application programming for each, in a group in a unique and confidential.

Each encryption chip with up to 16 different keys for the designer provides a number of possible means to divide the different categories of confidential information. 2) at present there are many different ways in the chip configuration authentication and data protection. For example there is only one area can write data doctors; and another area you may only save manufacturing history information, and so on.

Because of these chips are turn-key hardware devices without the use of microprocessors, so designers do not need to be programmed to accelerate product time to market and reduce the cost of testing and validation.

This analysis system can use a variety of different micro-controller to implement and use one or two line interfaces with the encryption chip.

These microcontrollers using small 8-pin or even more small 3 pin package so you can adapt to the most compact handheld device configuration.